3254 - Squeeeeek No More Contractor Pack- Hardwood and Carpted Floors - 500 Screws http://www.mysqueakyfloors.com/media/ecom/prodsm/3233PK.jpg Repair floor squeaks through carpeting with a Pro Squeeeeek No More a squeaky floor under carpet repair kit. TThe Squeeeeek No More Pro Kit ships at 9 pounds. UHP-3233-Pro-Kit 59.95 MySqueakyFloors.com in stock http://www.mysqueakyfloors.com/Item/Contractor_Squeaky_Floor_Repair_Kit
3254 - Squeeeeek No More Contractor Pack- Hardwood and Carpted Floors - 500 Screws
3254 - Squeeeeek No More Contractor Pack- Hardwood and Carpted Floors - 500 Screws
Our Price:
$59.95
Your Total:
Quantity:

Squeeeeek No More as seen on Ask This Old House is an excellent squeaky floors under carpet repair kit to eliminate floor squeaks, especially when there is no access to the floor joists. This squeaky floor repair kit is used directly through carpeting. Really!

I'll admit I was skeptical at first. Always before when I put a screw through carpeting, the screw would grab the nap of the carpet and wrap itself up. This time to be safe, I tested the Squeeeeek No More on a closet floor. Only when I felt comfortable with it did I tackle a couple of squeaky areas in the hallway.

The Squeeeeek No More Pro Kit contains a zinc alignment and depth control fixture, 500 specially scored 3-inch x 1/8-inch diameter screws (500 bulk pack screws), two customized driver bits to regulate the depth at which to drive the screw, six joist-finding screws to help find the joist from above, and two sample carpet (Berber or Looped) screws.

I have not tested the joist-finding screw that's part of the kit, but basically the joist-finding screw has only four threads at the end of the screw. If, after installing the screw through the carpet, underlayment, and subfloor it hits dead space, the screw will spin, but can be backed out with the aid of power screwgun and a pair of pliers. If it hits something solid, like a floor joist, it will back out the same as any other fastener.

Squeeeeek No More works so well because the 3/16-inch coarse thread of the special screw prevents it from being wrapped in carpet nap and the score on the neck of the screw allows it to snap off below the surface of the floor.

This product has a great 18 years+ track record and is successfully used by DIYers and professionals alike. Customers who have called to tell us they were unable to get the kit to work or that the kit didn't work hadn't carefully read the Troubleshoot Before Using The Squeeeeek No More Kit (above) or the Troubleshooting (below), didn't understand their floor's construction and/or how squeaks travel, or didn't know how to properly use a cordless drill.

Take a few minutes to read what our satisfied customers have to say by clicking here to read their feedback.

If you've got squeaks under your carpeted floors, the Squeeeeek No More Pro Kit is for you! All you need is a power screwgun and the courage to put that first screw through the carpet.

The Squeeeeek No More Pro Kit ships at 9 pounds.

Basic Instructions

Basic Instructions:

  • Locate the floor joist, using the technique outlined in the complete instructions included with every kit. Then, push the alignment and depth control fixture firmly into the carpet.
  • Place your weight around the fixture, and drive the screw down as far as the fixture will allow it to go.
  • Place the screw gripper on the alignment fixture over the screw head, then rock the fixture from left to right, snapping off 1-inch of the screw's shank. The screw breaks at the weak spot that is consistently just below the surface of the floor.

Squeak No More, photo 1
Squeak No More, photo 2
Squeak No More, photo 3

Troubleshoot Before Using The Squeeeeek No More (squeaky floors under carpet repair kit)

Before using this kit, I recommend that you print this page for reference. The flooring kit was designed to get the job done—we encourage you to read everything carefully before using the kit.

It's important that you understand your floor construction and isolate the squeaks. The kit has a proven track record and works as designed. These tips go beyond the instructions included with the kit. The biggest mistake most individuals make is that they get in a hurry to use the kit. Those who used the kit successfully are those who took their time and did their homework.

Where do squeaks come from? An estimated 85 percent of all squeaks come from the top of the floor joist and the underside of the subfloor. In most cases there's no glue between the joist and the subfloor and nails were used rather than screws. If nails were used, they most likely were not ringshank nails. Over time, regular nails will pop upward, causing the bottom side of the subfloor to rub on the top surface of the floor joist and on the shank of the nail and a squeak is born!

Squeaks can come from around floor ductwork. Squeaks can be created if one (or more) of the floor joists crowns downward rather than upward. Squeaks can be found in the field, i.e., the areas between joists. Squeaks could also come from between the subfloor and the underlayment or at the joints where they meet in double-floor construction. In single-floor construction, the squeaks could come from where the subfloor's joints meet or between hardwood and the subfloor. Normally in single-floor construction T&G sheet goods are used—squeaks could also come from the T&G joints.

Subfloors could be constructed using plywood sheets or 1x materials fastened on an angle to the tops of the floor joists. Normally 1x materials have spaces up to 1-inch between them, so if you are using the kit, it's possible that you could install a screw into one of these open areas. Because the fastener has nothing to grab on to, it will not work properly. This is one situation where it's really important to understand your floor's construction.

Where should you start? First spend time to isolate the squeaks. Once they are located and marked with painters' blue masking tape, locate your joists and the direction they run.

Next check to see if the squeaks you marked are in the same area as the floor joists (most likely they are). Now you are ready to use the kit. Begin by installing the screws directly over and into the floor joists. It is better to spread your screws apart, and the spread will be determined by the squeaks you located. If after doing this there are still squeaks, then begin again to isolate the squeaks. It's possible they are now within the field (between floor joists).

Don't get carried away and install screws all over the place. Just because the kit contains 50 screws doesn't mean that you should use them all in a concentrated area. Isolate the squeaks and determine the width of the squeak area. Then use as few screws as possible to stop the squeaks.

Here's the bottom line:

  check mark Isolate the squeaks;
  check mark Know the size of the area containing the squeaks;
  check mark Know whether or not you have a single- or double-floor construction; and
  check mark Know the direction the floor joists run and where they are located in relation to the squeaks.

You Might Also Like...

MySqueakyFloors.com
Your Cart
Your Cart: Empty
Search
© 2017 MySqueakyFloors.com, all rights reserved worldwide.
Software: ClickCartPro, Copyright 1999-2017 Kryptronic, Inc. Exec Time: 0.09664 Seconds Memory Usage: 4.448502 Megabytes